Liquid Application Rates

NASi anti-icer/de-icer products are formulated with a proprietary corrosion inhibitor package to protect copper, brass, aluminum, zinc and other metals and alloys. Local conditions such as ground and air temperatures, the frequency and intensity of precipitation (freezing rain, sleet, snow, rain or a mixture), humidity, and surface materials and application equipment will have significant effect on fluid and/or solid de-icer requirements.  Liquid properties including viscosity, specific gravity and surface tension as well as temperature will influence nozzle selection and spray pressure.

 

Alpine RF-11® and Alpine RF-14F® may be used as anti-icers or as de-icers. They are ready to use and require no dilution, mixing, or heating.

 

ANTI-ICING

 

The most efficient use of Alpine RF-11®and Alpine RF-14F®are as anti-icers. Pre-treat the pavement uniformly before the onset of precipitation to help prevent the adhesion of ice and snow and ease mechanical removal.

 

For the best anti-icer performance, loose snow should be mechanically removed prior to applying Alpine RF-11® or Alpine RF-14F® liquid runway de-icer.

 

 

Suggested MINIMUM Application rate: ½ Gallon per 1,000 sq. ft.

 

DEI-CING

 

When using Alpine RF-11® or Alpine RF-14F® as a de-icer it is best applied in bands using high diffusion nozzles. This allows the fluid to penetrate the ice to break the bond with the surface to ease mechanical removal.

 

 

Suggested Application rate:

1 Gallon per 1,000 sq. ft. for thin ice and increase depending on the thickness of the accumulation – approximately 3 gallons per 1,000 sq. ft. for ice up to an inch thick.

 

 

PRE-WETTING SOLID

 

Alpine RF-11® and Alpine RF-14F® improves the effectiveness of solid de-icers and sand.

 

Alpine RF-11® and Alpine RF-14F® can be sprayed directly on sand or solid de-icer or on the pavement when spreading.

 

 

Suggested Application rate:

The estimated application rate range is 5% to 15% by weight of solid material. This is approximately 1.25 gallons of Alpine RF-11® or Alpine RF-14F® per 100 lbs. of sand or solid de-icer.

NASi is a major manufacture of the following chemicals and solutions in the industrial market:

  • Ammonium Hydroxide
  • Ammonium Sulfate (NSF/ANSI 60)
  • Aqua Ammonia
  • Calcium Nitrate
  • Diammonium Phosphate
  • Dipotassium Phosphate (FCC, OU)
  • Monoammonium Phosphate
  • Monopotassium Phosphate
  • Phosphoric Acid (Technical, NSF/ANSI 60)
  • Potassium Acetate
  • Potassium Bicarbonate
  • Potassium Carbonate (NSF/ANSI 60)

                  - Dry or Liquid

  • Potassium Carbonate/Potassium Hydroxide Blends
  • Potassium Formate
  • Urea Liquors (to 50%)
  • Toll Production
  • Ship to quality/order (every time)
  • Logistical management
  • Global raw material acquisition
  • 24/7 manufacturing & shipping
  • Chemical engineering support
  • Custom manufacturing to meet specific requirements

THE INFORMATION SET FORTH IN THIS WEBSITE IS BELIEVED TO BE ACCURATE AS OF THE PRESENT DATE. SINCE THE ACTUAL USE BY OTHERS IS BEYOND OUR CONTROL, IT IS THE PURCHASER’S/USER’S RESPONSIBILITY TO DETERMINE THE SUITABILITY OF THE PRODUCT FOR THEIR OWN USE AND PURPOSE. NACHURS ALPINE SOLUTIONS MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESSED, IMPLIED OR FITNESS FOR A PARTICULAR PURPOSE. NACHURS ALPINE SOLUTIONS NEITHER ASSUMES RESPONSIBILITY REGARDING THE ACCURACY OR SUITABILITY OF SUCH INFORMATION OR PRODUCT FOR APPLICATION TO PURCHASER’S INTENDED USE OR PURPOSE NOR FOR THE CONSEQUENCES OF ITS USE. NO SUGGESTIONS FOR USE ARE INTENDED, AND NOTHING HEREIN SHALL BE CONSTRUED AS A RECOMMENDATION TO INFRINGE ANY EXISTING PATENTS OR TO VIOLATE ANY FEDERAL, STATE OR LOCAL LAWS, RULES OR REGULATIONS.

 

© Copyright 2016 NACHURS ALPINE SOLUTIONS Industrial (NASi)